The purpose of this project:
I built SqueezeCore because I needed a lightweight, minimal, plug&play OS to use it as a squeezelite player. The whole OS is 17MB and when running it occupies around 60MB of RAM; SqueezeCore must be installed on a USB drive and will run completely in RAM. Perfect to be installed on a thin client!
- RAM: 128MB
- CPU: 32bit or 64bit, every CPU is ok, it can run on a toaster too
- USB flash drive: 32MB
- An ethernet port
- A monitor for first setup (optional)
- A keyboard for first setup (optional)
- A computer running Logitech Media Server
Download SqueezeCore .IMG from here: SqueezeCore
Flash the .IMG using Etcher or a similar software
Which version should I download?
1st rule: if you are unsure download the generic .img. It is usually more stable, and has less specific hardware requirements.
If you want to try the RT version please read all the FAQs before. Since the generic image is stable enough all the development will be on the RT.
Using monitor and keyboard (recommended):
Plug into your computer the USB flash drive with SqueezeCore, an ethernet cable (wifi not supported at the moment), a keyboard and a monitor.
Power on and boot from USB.
Now you will have to enter some squeezelite settings like: what audio device use as output, buffer settings and so on; if you have any doubts leave all settings as default and just select your audio output device. (Important: read carefully the options during the setup)
From now on every time you power on your computer squeezelite will start at boot with the defined settings.
Plug the SqueezeCore USB drive to your computer. Create a file named squeeze.conf inside the “/config” directory. Open squeeze.conf with Notepad++ (or a similar editor that allows you to set the UNIX(LF) newline) and insert the squeezelite options following this example:
Output=hw:CARD=UD501,DEV=0 #1st line: output device
PlayerName=SqueezeCore #2nd line: Player Name
ModelName=SqueezeCore #3rd line: Model Name
Server= #4th line: [server_address:port], empty to autodiscover
AlsaParams=40:4::0 #5th line: ALSA parameters [buffer:period_count:sample_format:mmap]
Buffer=4096:3072 #6th line: [stream_buffer:output_buffer]
Priority=45 #7th line: process priority [1-99]
AdditionalOptions= #8th line: [OPTIONAL] additional commands
In the same way create a file named network.conf with the following syntax:
In the IP field you can type DHCP to automatically get an IP address, in this case leave all the other fields empty. See example:
Save, plug your SqueezeCore USB flash drive to your PC, power on, profit!
I want bit-perfect audio but in the output device list my dac does not appear as “hw:CARD=card_name” but only “default:CARD=card_name”
You can try to type 0 during output selection to not choose any option, then, in additional options (last question) type “-o hw:CARD=card_name,DEV=0”
I want to reset my configuration! How can I do it?
Directly on SqueezeCore: “rm -f /squeezecore/config/squeeze.conf && sync”
From Windows: delete /config/squeeze.conf
But, what about the RT version?
It is a specific build with a custom Real Time kernel; the hardware requirements are different from the generic version:
Minimal Hardware Requirements for RT:
CPU: Only Intel, Only Core2Duo and newer (Xeon, Core i3 i5 i7, new Pentium and Celeron). 2 core 4 thread (recommended 4 physical cores).
The Other requirements are the same of the generic one.
In the RT version the difference is not only in the kernel but there are other tweaks under the hood like:
The player runs on a isolated core with round robin scheduler.
All the DAC USB interrupts are isolated on one core.
The remaining core are for kernel and the remaining interrupts and software running.
Since the RT version has more strict hardware requirements do you have any suggestion for the hardware setup?
I really like mini-ITX and thin-ITX motherboards with Pentium and Celeron N-series (like N3160) or J-series (like j4105 j3455). Those models have 4 cores and very low power consuption.
About bios settings you can try to disable multi-threading and C-states (but I really don’t know if this can affect the sound performance, you can try and come back here to write your feedback)
- Marco Curti for Squeezelite-R2
- TinyCoreLinux team for their awesome distro. Squeezecore is based on Tinycorelinux.
If you are using SqueezeCore and you like it consider to buy me a coffee: paypal.me
ciao lo sto provando, intanto devo che i dsd non li riproduce esatto? altrimenti sbaglio io. grazie cmq funziona da dio velocissimo bravo
Ciao Luca! Ho appena testato e i DSD li riproduce senza problemi, sia in DSD nativo che in DoP. Quindi possiamo provare a risolvere, ti chiedo qualche informazione così da capire dove è il problema:
Il file che stai riproducendo è in formato .dsf?
Che DAC stai utilizzando, è connesso in USB?
Collega la chiavetta di SqueezeCore al tuo computer, nella cartella “config” è presente il file “squeeze.conf”, aprilo con il blocco note e copiane il contenuto e scrivimelo.
Ciao come dac uso un topping d30 legge in nativo fino a dsd 128. Si i file sono dsf, appena riesco Ti giro il contenuto del file. Grazie
eccoti il contenuto del file
prova a sostituire default:CARD=D30 con hw:CARD=D30,DEV=0
perfetto funziona adesso, ora provo a far comparazione con daphile usando lo stesso server e cambiando il player. grazie ancora.
Perfetto, tieni d’occhio la pagina che entro 7/10gg dovrei rilasciare una nuova versione!
Hi Nice work it really is simple to get going, I had several HP thin clients lying around and instead of installing ubuntu I just use this on the internal drive. Using Ubuntu usb stick to boot and dd command to setup your image in the internal drive. Superb work I would though prefer a separate dialog question for the palyer name now it sett as an option -n name. Is there anyway to see volumes in this distro i tried alsa and ossmix but nothing exsist. I assuem pretty much everything is clened out to make it som small, but could be interesting to know which commands exist.
The script at start-up already lists any audio devices available
Hi nice work I had a bunch och HP thin clients lying around and instead of installing ubuntu and the run squeexelite player this comes more handy. I have 2 problems thoug I have installed image on clients built in flash memory and it all starts and run first time after removing config file but after reboot it shows up it server but doesn’t get any audio output.
Second question is about master volume that boots up to 55% and I can set it ti 100 with amixer sset Master 100% but alsactl store doesn’t store the settings, must be something im missing.
Try to set the output device as “hw:” like in the example of the article. In this way the volume is fixed at 100%
I would like to limit the CPU freq, how can i do that ?
I see that squeezelite use the turbo freq 2,1ghz and i prefer to stay at the base freq wich is 1,5ghz (celeron J3455),
Thanks a lot
Diaable turbo boost in bios settings
i try this :
remove intel_pstate=disable from syslinux.cfg
put this 2 lines in /opt/bootlocal.sh :
echo performance | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
echo 1500000 | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_max_freq
now the frequency doesn’t go up to 1500000 but it is changing whereas it should stay fixed
I would like to install SqueezeCore on a hard drive,
I try to copy the usb disk on a partition and chainload from grub, but it doesn’t boot,
What can i do ?
You can write the img in the same way like you did with the usb drive: Using Rufus or any similar software
i tried to raise the squeezelite buffer :
But the sound is chopped, i don’t understand why
This settings works fine on other os
Can you post here the content of squeeze.conf and the specs of the pc you are using?
Intel® Celeron® Processor J3455
with 8go RAM
Perfect. I just need one more info and then I can write you some settings to try to isolate the problem. Are you using the version with real time kernel?
yes i use the realtime kernel
one other thing i notice : i have 8 go RAM, but i see Squeezecore uses only 2 go (with free command), it is the size of my usb key…
Very weird. Do you get the same ram size even with top command?
To solve the problem you reported I advise you to first always test with normal version, not the real time one which can be unpredictable and nasty to debug. Start with the recommended config and then tweak from it. The buffer size in particular if you want to have all files in RAM you just need to raise the stream buffer and not the output buffer. Please let me know about the result of testing
Same thing with top command
With the no realtime version, the sound is ok (no more chopped) with the buffer 524288:524288. I will stay with that.
hi, is there any updated version of SqueezeCore, with the new tinycore version and the new version of squeezelite client? appreciate you work, thanks
and can you add roon bridge to the image and autostart it like squeezelite , it will be very helpful
As a Roon user myself this is actually a very good idea. I’ll think about it.
I have noticed that squeezelite doesn’t sound as good as aplay (with the same parameters).
i found that very akward. In github they responded me that it is the same result in squezzelite and aplay, and they doesn’t want to dig that. Maybe with your knowledge, you can find something.
to play with aplay, i do that :
flac -c -d /home/hifi/Audio/Musique/’Youn Sun Nah – Same Girl’/01* | aplay -D plughw:0,0 -B 200000 -F 50000
to play with squeeelite, i use these parameters :
ARGS=-o hw:0,0 -p 75 -a 200:4:: -b 15360:20480 -c pcm,flac,aac,mp3 -r 44100,48000,88200,96000:100